Copyright 2021 © All rights Reserved.
S RANGE GRADER BLADE
The KANGA S Range Grader Blade has been engineered for tractors 25 to 35hp.
The reinforced mouldboard is designed to keep material flowing, while the heat treated cutting edge is reversible.
With simple manual adjustments, the operator can move material side to side, offset the blade to grade in hard to reach areas and tilt the blade (up to 150mm over the width of the blade) to maintain camber on a road or grade a slight slope into the terrain.
|Description||S1800 (1.8m/6’) Grader Blade|
|Headstock||Steel 100x100x4mm sq. tube, welded|
|Mouldboard||6mm with channel reinforcing|
|Cutting edge||150x12mm, spring steel, reversible|
|Linkage/mounting||Double clevis, Category 1|
|Adjustments||Angle, offset and tilt|
|Blade angle||28 positions over 360°|
|Blade offset||6 positions (3 left and 3 right)|
|Blade tilt||Camber only (150mm using lower linkage holes)|
|Controlled by||Pins, clips, wingnut|
|Overall width (mm)||1800|
|Tractor range (hp)||25 – 35|
|KBDWS||KANGA S1800 depth wheel|