• Sales & Service 86 Conway Street
• Spare Parts & Accessories 84 Conway Street
• Lismore NSW 2480
• Call Us : 02 66215981
• Sales & Service 86 Conway Street
• Spare Parts & Accessories 84 Conway Street
• Lismore NSW 2480
• Phone : 02 66215981
MULTI CLAMP GRADER BLADE
The KANGA Multi Clamp Grader Blades have been engineered for creating and maintaining dirt tracks, rebreaks and drains and perform general clearing of scrub, scraping and grading.
Made in Australia for Australian conditions, they are suitable for tractors 40 to 70hp.
The Multi Clamp Grader Blade is a locking wedge design that allows the operator to set the blade to move material side to side, offset the blade for hard to reach areas and tilt the blade to create a slope in multiple positions (0°- 45° each direction in 5° increments).
The reinforced mouldboard has been designed to ensure material keeps flowing as the operator is working.
The blade can also be reversed so the operator can back blade to clear scrub and debris with less chance of damaging tractor tyres.
Code | KBMC180 |
---|---|
Description | 1.8m/6ft Multi Clamp Grader Blade |
Headstock | Steel 140mm line pipe and 6mm sq. tube, welded |
Mouldboard | 8mm with channel reinforcing and 16mm turn tables |
Cutting edge | 150x12mm, heat hardened, spring steel, reversible |
Linkage/mounting | Double clevis, category 1 and 2 |
Finish | High build primer and equipment enamel top coat |
Adjustments | Angle, offset and tilt |
Blade angle | 0°- 45° in 5° increments forwards and backwards |
Blade offset | 0°- 45° in 5° increments left and right |
Blade tilt | 0°- 45° in 5° increments up and down |
Controlled by | Knock in/out metal clamps with springs |
Overall width (mm) | 1800 |
Tractor range (hp) | 40 – 60 |
Weight (kg) | 320 |
Code | KBMC240 |
---|---|
Description | 2.4m/8ft Multi Clamp Grader Blade |
Headstock | Steel 140mm line pipe and 6mm sq. tube, welded |
Mouldboard | 8mm with channel reinforcing and 16mm turn tables |
Cutting edge | 150x12mm, heat hardened, spring steel, reversible |
Linkage/mounting | Double clevis, category 1 and 2 |
Finish | High build primer and equipment enamel top coat |
Adjustments | Angle, offset and tilt |
Blade angle | 0°- 45° in 5° increments forwards and backwards |
Blade offset | 0°- 45° in 5° increments left and right |
Blade tilt | 0°- 45° in 5° increments up and down |
Controlled by | Knock in/out metal clamps with springs |
Overall width (mm) | 2400 |
Tractor range (hp) | 50 – 70 |
Weight (kg) | 350 |
KBDWMC | KANGA Multi Clamp depth wheel |
Copyright 2021 © All rights Reserved.