John Deere took a reliable hydraulic system and made it even better on the 8030 Series. These improvements provide greater hydraulic flow even at lower engine rpm. The integrated hydraulic system also boasts fewer parts, fewer connections, and shorter hydraulic lines that enhance reliability. And there is plenty of reserve hydraulic capacity (up to 60 percent more oil) to operate single-acting cylinders – especially helpful if you operate large dump carts, forage boxes, or sugarcane carts. Steering and hydraulics are extremely responsive. And only John Deere offers TouchSet hydraulic control. It's especially beneficial if you use air seeders or vacuum-type planters. And as its name implies, you can simply touch and set hydraulic flow to individual SCV5 on-the-go right from your seat.

The improved hydraulic system provides more flow, even at low engine rpm for enhanced performance.

1. Use the TouchSet keypad to set remote hydraulic cylinder upper and lower limits.
2. Keypad deactivates the hydraulic system prior to transport.
3. Set individual SCV's by pressing the corresponding Roman numeral. Adjust the timed detent and flow with two rotary knobs (4 and 5).
4. Set the length of time for oil to flow. Each time the hydraulic lever is engaged oil will flow automatically for the specified time set – now up to 60 seconds.
5. Set hydraulic flow by turning the dial. Adjust it from your seat, on-the-go, while the SCV is operating.
6. Large digital display shows the rate, flow and flow time.

Standard/Optional Hydraulic Flow
Wheels

• 8130 to 8330 – 44gpm is standard
• 8130 to 8330 – 60gpm is optional
• 8430, 8530 – 60 gpm is standard

Tracks

• 8230T to 8430T – 33.5gpm is standard
• 8230T to 8430T – 42 gpm is optional

Exclusive Implement Management System (IMS) – is a feature that all operators are sure to appreciate.

You can set IMS to simultaneously perform multiple tractor functions per switch (up to 20 total) – push-button easy.
IMS increases efficiency and productivity, plus it minimizes operator fatigue. And by simplifying complex turning sequences, even less experienced operators can become more productive, more quickly.

You can set IMS to simultaneously shift down a gear, disengage the diff-lock, and raise the implement at the end of the row –all with the push of a single button. After making the turn simply push a button and the tractor automatically shifts up, re-engages the diff-lock, and lowers the implement back into the ground for simple, consistent, and efficient turns.
IMS simplifies applications that require multiple operator inputs. This boosts efficiency and reduces operator fatigue.